Tag Archives | Yield Strength of Metals

Most of us are quite conversant with the simple tension test which is the most common and is conducted to determine the yield strength, ultimate tensile strength, percent elongation and fracture strength of metals. Figures 1.6 and 1.7 show typical stress-strain curves obtained in tension tests on two different alloys. Figure 1.6 is obtained for a low carbon steel or [...]

In metal forming, particularly in hot forming many metallurgical processes may take place concurrently. These include strain hardening, recovery, re-crystallization, etc. All these factors affect the yield strength. Therefore, it is important to know the extent of effect of each of these factors. The yield strength of a metal or alloy is affected by following factors: (i) Strain hardening. (ii) [...]